Loading page…
Service
Test flow, head and efficiency on your pumps and bring each one back to its best operating point.
Trusted by 100+Industrial Clients
Up to 70% potential energy savings
Overview
Flow, head and efficiency testing to bring pumps back to their best operating point. We turn the findings into practical recommendations that cut pumping power, lower operating costs and improve system reliability.
What we cover
Flow, head and full electrical parameters (kW, PF, voltage, current) measured on each pump.
Losses from valves and bypass lines quantified.
Impeller trims, VFDs or replacement where it pays.
Before-and-after kW to prove the result.
Why It Matters
Pumps often run far from their best efficiency point, with throttled valves and open bypasses burning power around the clock. Testing the whole system against your actual end-use demand, not the installed or design capacity, shows where that energy goes.
Talk to Our Experts
Our Process
The four steps we follow on every Pumping Systems engagement, from site survey to measurable results.
Pumps, valves and pipe runs mapped and inspected.
Operating point measured against the pump curve.
Trims, drives and pipework changes ranked by payback.
Support through execution, then re-measured to prove the savings.
FAQ
Common questions about our pumping systems. Can’t find yours? Our energy experts are a call away.
Flow, head and input power, so we can work out actual pump efficiency and where the pump sits on its curve.
The flow at which a pump turns power into flow and head most efficiently. Pumps running far from it waste energy and wear faster.
A throttled valve or open bypass makes the pump work against itself. The energy is lost as pressure drop, around the clock.
Savings of up to 70% are possible, depending on how far your existing pumps run from their best efficiency point.
No. Measurements are taken while your plant runs normally, and improvements are planned to be implemented without disrupting production.
Get Started
Your first consultation is free, with no obligation.
What happens next
Your site, systems and goals.
A certified auditor calls you back.
Scope, timeline and savings.
Prefer to talk it through?
Send Us a Message
We’ve preselected Pumping Systems for you. Add a few details about your site and our experts will be in touch.
Airflow, pressure and power measurements across the fan, blower and duct distribution system.
FAD testing, leak surveys, pressure optimisation and compressor loading analysis.
Chiller performance, kW/TR and air-side balancing for comfort and process cooling.
